Walbro In-Tank Pickups

Walbro In-Tank Pickups

 

These Walbro in-tank pickups have a 70 micron mesh that serve as a pre-filter. When submerged, the pickups flow fuel through as normal.  If there is a shortage of fuel where the pickup is, they shut preventing air from entering the fuel system.  Generally they are plumbed in systems of 3 or 4 pickups, usually one in each corner depending on the size of the fuel cell.  Tall skinny fuel cells such as RCI’s 2161a can get away with just two pickups.  If there is any chance that the vehicle these are installed in might run completely empty, Walbro recommends at least one pickup in the system to have a bleed hole.  MP-13s and MP-15s have a bleed hole in them, MP-12, MP-14, and MP-16 do not.

MP-12s and MP-13s are dead end style pickups meaning there is a single 5/16” fitting on the top.  MP-14s, 15s, and 16s, are flow through style and are meant to be installed inline in the system.  The MP-16s are a 90* flow through.

These pickups are approximately 3 inches in diameter and 2 inches tall.

12%
Weight 0.50 lbs
 
Market price: $32.00
Our price: $28.00
Part Number
Qty
Gift certificates

}